WORKFLOW
1.Quoting
Quoting according to 2-D drawing/3-D model or sample from customer
2.Communication
Communicating about payment terms & way of transportation
3.Contract
Signing contract
4.Payment
Arranging payment according to contract
5. Molding
Developing mould
6.Sample of Energy Meter Box
Submitting sample for approval
7.Quantity production
Launching quantity production after sample approval
8 Packing & Exportation
Assembly & packing for exportation
Our company has  worked in metering field for over 30 years.We have rich R&D experience for molding & producing meter parts. We can develop moulds & launch quantity production according to 3-D drawings or sample from customer.
Before mould developing, we can apply PRO-E/UG software to check the feasibility of the design, and will correct or take precautions against those problems which will appear in mould development or future quantity production. Meanwhile our engineers can well control the tolerance of mounting dimensions to ensure tight fitting, and for material selection, our engineers can also give good suggestion.
In our factory, we have well established production line from mould development, quantity production, assembly to packaging & final exportation. We produce both plastic parts & metal parts for KWH meter at our side and then assemble & export it as a complete set.
This type of meter includes the following accessories:
1. Meter base
2. Transparent Meter cover
3. Terminal cover
4. Nameplate
5. Terminal block
6. Gasket for case
7. Gasket for terminal block
9.  Hook and matching screw
10. sealing screws
PACKING
One piece of power meter case inside a foam box for Energy Meter Enclosure
MATERIAL USED
PP, ABS, PC, PC+ABS, PC+PBT, PPS, PE, POM, PA6/PA66+FIBREGLASS, PMMA, PPO, PBT, HDPE/LDPE, TPE, TPU, etc
EUIPMENT
Full-computerized plastic injection machine of 60T, 90T, 120T, 160T, 200T, 250T, 280T, 320T, 380T ,500T
WORKFLOW
Our company has worked in metering field for over 30 years. We have rich R&D experience for molding & producing meter parts. We can develop moulds & launch quantity production according to 3-D drawings or sample from customer.
Before mould developing, we can apply PRO-E/UG software to check the feasibility of the design, and will correct or take precautions against those problems which will appear in mould development or future quantity production. Meanwhile our engineers can well control the tolerance of mounting dimensions to ensure tight fitting, and for material selection, our engineers can also give good suggestion.
In our factory, we have well established production line from mould development, quantity production, assembly to packaging & final exportation. We produce both plastic parts & metal parts for KWH meter at our side and then assemble & export it as a complete set.
This type of meter includes the following accessories:
1. Meter base
2. Transparent Meter cover
3. Terminal cover
4. Nameplate
5. Terminal block
6. Gasket for case
7. Gasket for terminal block
9. Hook and matching screw
10. Sealing screws
PACKING
One piece of power meter case inside a foam box for Energy Meter Enclosure
MATERIAL USED
PP, ABS, PC, PC+ABS, PC+PBT, PPS, PE, POM, PA6/PA66+FIBREGLASS, PMMA, PPO, PBT, HDPE/LDPE, TPE, TPU, etc
EUIPMENT
Full-computerized plastic injection machine of 60T, 90T, 120T, 160T, 200T, 250T, 280T, 320T, 380T, 500T
WORKFLOW
1.Quoting
Quoting according to 2-D drawing/3-D model or sample from customer
2.Communication
Communicating about payment terms & way of transportation
3.Contract
Signing contract
4.Payment
Arranging payment according to contract
5. Molding
Developing mould
6.Sample of Energy Meter Box
Submitting sample for approval
7.Quantity production
Launching quantity production after sample approval
8 Packing & Exportation
Assembly & packing for exportation
Our company has  worked in metering field for over 30 years.We have rich R&D experience for molding & producing meter parts. We can develop moulds & launch quantity production according to 3-D drawings or sample from customer.
Before mould developing, we can apply PRO-E/UG software to check the feasibility of the design, and will correct or take precautions against those problems which will appear in mould development or future quantity production. Meanwhile our engineers can well control the tolerance of mounting dimensions to ensure tight fitting, and for material selection, our engineers can also give good suggestion.
In our factory, we have well established production line from mould development, quantity production, assembly to packaging & final exportation. We produce both plastic parts & metal parts for KWH meter at our side and then assemble & export it as a complete set.
This type of meter includes the following accessories:
1. Meter base
2. Transparent Meter cover
3. Terminal cover
4. Nameplate
5. Terminal block
6. Gasket for case
7. Gasket for terminal block
9.  Hook and matching screw
10. sealing screws
PACKING
One piece of power meter case inside a foam box for Energy Meter Enclosure
MATERIAL USED
PP, ABS, PC, PC+ABS, PC+PBT, PPS, PE, POM, PA6/PA66+FIBREGLASS, PMMA, PPO, PBT, HDPE/LDPE, TPE, TPU, etc
EUIPMENT
Full-computerized plastic injection machine of 60T, 90T, 120T, 160T, 200T, 250T, 280T, 320T, 380T ,500T